Available in simple to use mylar packets
One packet can make up to 32 ounces of solvent ink.
We also have a larger size to make 128 ounces for one gallon.
This powder is designed to use as a
security marking product for tools, durable
plastics, cable wire coating, glass, & other non
porous surfaces. We recommend TWO solvents to choose
from which work great.
XYLENE or MEK
which can be
purchased in quarts & gallons at any hardware store.
These two products are strong smelling solvents use
caution & warning information listed on cans when
has a slightly milder aroma we
like but still very strong. We recommend these two
from tests we have performed and they dry rapidly
and will make great permanent ink that will dry and
contact. Any other types of solvents may not disolve
powder or create a bond.
The two solvent chemicals
XYLENE or MEK
harmful to certain plastics and we recommend testing
small areas on certain products prior to full use.
This is at your risk as
powders are non refundable.
You can save hundreds of dollars using our powder.
Many example photos above show actual uses on
Always follow all directions on the products you
choose. SDS information is available on our powder
upon request. Chemical manufactures will also
provide SDS info or you can look them up online as
most are listed.
Use in well ventilated areas. Wear appropriate
safety glasses and breathing gear per chemical
instructions on the product your using. SAFETY
FIRST. Black Light World® Is not responsible for
misuse, mixing, failure to follow proper
instructions. Buyer assumes all liability for use.
SDS NEON-OPTICS NEON
SOLVENT INK POWDER.pdf